Leave Your Message
21M Type  Metal Bellow Mechanical Seals
For Steam Turbine And Other Pumps

21M Type Metal Bellow Mechanical Seals

The welded bellows seal adopts a cartridge design. Before installation, the surface finish and dimensional tolerances of the shaft (or shaft sleeve) shall be verified to prevent damage to the bellows welds during installation.

    Structural characteristics

    The core innovation of the 21M seal lies in its welded metal bellows. These are fabricated from multi-layer metal sheets (with a thickness of less than 0.4 mm) that are stamped into annular parts featuring S-shaped cross-sections. These layers are then alternately welded along their inner and outer circumferences. This construction integrates three critical functions into a single component: providing elastic force, ensuring auxiliary sealing, and transmitting torque. This design eliminates the need for dynamic O-rings, which are common failure points in conventional seals, thereby enhancing overall system reliability.

    Working parameters

    ●Shaft diameter: ≤200mm
    ●Pressure:Up to 25 bar
    ●Temperature: -40℃~200℃ 
    ●Linear speed: ≤20m/s

    Applicable media

    Refining units, centrifugal pumps, and reactor vessel seals.

    Application Areas

    Hydraulic pressure can cause axial displacement in the bellows, leading to fluctuations in the effective sealing area ratio. This must be fully accounted for during system design.

    Special Instructions

    21JM Metal Bellow Mechanical Seals.jpg

    d D D1 L1 L2
    16 30 27 10 32.7
    18 32 33 11.5 30.7
    20 33.5 35 11.5 30.7
    22 36.5 37 11.5 30.7
    24 39 39 11.5 28.7
    25 39.6 40 11.5 28.7
    28 42.8 43 11.5 31.2
    30 45 45 11.5 31.2
    32 46 48 11.5 31.2
    33 48 48 11.5 31.2
    35 49.2 50 11.5 31.2
    38 52.3 56 14 31.2
    40 55.5 58 14 31.2
    43 57.5 61 14 31.2
    45 58.7 63 14 31.2
    48 61.9 66 14 31.2
    50 65 70 15 32.7
    53 68.2 73 15 32.7
    55 70 75 15 32.7
    58 71.7 78 15 37.7
    60 74.6 80 15 37.7
    63 79 83 15 37.7
    65 84.1 85 15 37.7
    68 87.3 90 18 34.7
    70 87.3 92 18 42.2
    75 95 97 18 42.2
    80 98.4 105 18.2 42
    85 104.7 110 18.2 42
    90 111 115 18.2 47
    95 114 120 17.2 48
    100 117.4 125 17.2 48

    Leave Your Message