01
Introduction to Type 212 Mechanical Seals
2025-11-19
Core Parameters
| Parameter | Range |
|---|---|
| Pressure Range | -0.1~0.6 MPa (negative pressure to 0.6 kgf/cm2) |
| Temperature Range | -40℃~120℃ |
| Speed Limit | ≤ 500 revolutions per minute (rpm) |
| Suitable Media | Strongly corrosive media (without suspended particles), such as sulfuric acid, nitric acid, and organic acids |
| Structural Features | Externally mounted, single-end face, multi-spring, balanced type |
Specification and Model Nomenclature
The model is denoted as 212-DN, where "DN" represents the shaft diameter (in mm). Common specifications include:
- 212-40 (shaft diameter: 40 mm)
- 212-50 (shaft diameter: 50 mm)
- 212-65 (shaft diameter: 65 mm)
- 212-80 (shaft diameter: 80 mm)
- 212-95 (shaft diameter: 95 mm)
Application Scenarios
Main Applications:
- Shaft sealing for agitators in glass-lined reactors
- Sealing for vacuum equipment
- Titanium alloy reactors
- Agitation equipment requiring strong corrosion resistance
Key Advantages
- Suitable for working conditions with slightly large radial runout
- Simple structure, easy installation and maintenance
- Excellent sealing performance and long service life
Selection Recommendations
Confirm Shaft Diameter: Measure the equipment’s shaft diameter and select the corresponding specification (e.g., Type 212-50 matches a 50 mm shaft diameter).
Operating Condition Assessment:
- Medium properties: Whether it is a strongly corrosive liquid/gas, and whether there are particles.
- Operating pressure: Positive or negative pressure, and the specific value.
- Operating temperature: Minimum and maximum temperatures.
- Agitator speed.
Material Selection:
- Stationary ring: Typically alumina ceramics (wear-resistant and corrosion-resistant).
- Rotating ring: Filled PTFE bellows (excellent corrosion resistance).
- Springs: 304/316 stainless steel or Hastelloy can be selected based on the corrosiveness of the medium.
- Recommended Companies: Zhejiang Jiemi Sealing Technology Co., Ltd.











