Leave Your Message
Type 212 Mechanical seal
Reactor Mechanical Seal

Type 212 Mechanical seal

●Single-end face, modular overall pre-assembled structure, no on-site adjustment is required during installation, greatly reducing the difficulty of debugging.

●Adopting multi-spring balanced design, the spring pressure is evenly distributed, the transmission sleeve is driven, and the axial compensation ability is strong.

●Equipped with a cooling/flushing chamber (the gas-liquid interface of the green shell is used to introduce cooling water or flushing medium), the metal shell is cast iron (green paint), and corrosion-resistant components (such as polytetrafluoroethylene parts) are integrated inside. The friction pair can be made of wear-resistant materials such as cemented carbide and silicon carbide, and the auxiliary sealing ring is adapted to corrosion-resistant materials such as fluororubber.

    Structural characteristics

    1.Single‑end face structure of PTFE bellows

    2. Arbitrary rotation direction

    3. Capable of accommodating large

    Working parameters

    Pressure: ≤0.3MPa

    Temperature: -20~120℃

    Linear velocity: ≤2 m/s

    Applicable media

    Chemical liquids (acid, alkali, salt solutions), organic solvents, media containing a small amount of particles (particle content ≤ 20%)

    Application Areas

    For top-entry reactors,Widely used in enamel-lined and stainless steel stirred reaction kettles for industries such as pharmaceuticals, chemicals, pesticides, and dyes.

    Special Instructions

    212.jpg

    69mark

    d0 D1 D2 D3 n Φ
    42 110 140 170 6 15
    50 125 170 200 8 15
    60 165 190 220 10 15
    65/70/76 200 250 280 16 15
    80/89/90 200 250 280 16 15
    110/120 250 280 315 8 18
    130/140 250 280 315 8 18

    79mark

    d0 D1 D2 D3 n Φ
    35/40/42 95 130 160 4 15
    50 110 150 185 4 18
    55/60/65 140 170 205 4 18
    70/75/76 160 200 235 8 18
    80/85/89 160 200 235 8 18
    90/95 160 200 235 8 18
    100/102 220 255 290 8 18
    110 220 255 290 8 18

    91、92、93mark

    d0 D1 D2 D3 n Φ
    80/89 200 225 260 8 18
    90/95 200 225 260 8 18
    125 250 280 315 8 18
    135/140 260 335 375 12 18
    145/150 260 335 375 12 18
    160 260 335 375 12 18

    GB/T 9119-2010 PN10

    d0 D1 D2 D3 n Φ
    40 95 145 185 4 18
    50 125 160 200 8 18
    65 140 180 220 8 18
    80 160 210 250 8 18
    95/100 200 240 285 8 22
    110/125 250 295 340 8 22
    130 250 295 340 8 22

    Ningbo Mark

    d0 D1 D2 D3 n Φ
    42 110 150 185 4 18
    50 125 170 205 4 18
    69 220 250 280 8 18
    95 200 250 280 8 18

    Leave Your Message