Leave Your Message
261 series mechanical seal for side stirred tank
Special For General Pumps

261 series mechanical seal for side stirred tank

It can also be applied to side-mounted and horizontal agitators in flue gas desulfurization devices, as well as those handling other media containing corrosive suspended solid particles or easily crystallizable solutions.

    Structural characteristics

    ●Adopt single-end/double-end optional design, multi-spring balanced structure, transmission sleeve/lug transmission, uniform spring pressure distribution, and strong axial compensation capability.

    ●The typical configuration of the friction pair is silicon carbide against silicon carbide (or cemented carbide against graphite), which has excellent wear and corrosion resistance; the auxiliary sealing ring can be selected from fluororubber, metal bellows, etc. to adapt to complex working conditions.

    ●Some models are pre-assembled as a container, which is easy to install and reduces the workload of on-site commissioning; they are equipped with a cooling/flushing chamber, which can be filled with cooling water or flushing medium to control the temperature of the sealing chamber.

    Working parameters

    ●Pressure: Sealed chamber pressure ≤ 0.6MPa (some enhanced models can reach 1.0MPa)

    ●Temperature: -10℃~130℃ (Special materials can be extended to -20℃~200℃)

    ●Linear speed: ≤3m/s

    ●Speed: ≤500r/min

    ●Shaft diameter: φ30mm~φ100mm

    Applicable media

    ●Highly corrosive media: acid, alkali, salt solution, organic solvent, etc.

    ●Medium containing particles: medium with high impurity content such as gypsum slurry, lime slurry, etc. (need to match wear-resistant friction pairs).

    ●General media: water, oil, chemical liquid, etc. (food grade materials are available for pharmaceutical and food industries).

    Application Areas

    ●Desulfurization absorption tower: Side agitator seal of the absorption tower in the flue gas desulfurization device of coal-fired power generation.

    ●Reaction kettle: Enamel kettle and stainless steel kettle stirring shaft seal in chemical, papermaking and other industries.

    ●Others: Shaft seals for chemical process pumps, agitators and other rotating equipment.

    Special Instructions

    ●During installation, the verticality of the equipment flange and the shaft must be strictly checked (≤0.05mm), and the surface roughness of the shaft diameter must be Ra≤1.6μm.

    ●For working conditions with particulate media, silicon carbide to silicon carbide friction pairs must be selected, and the flushing cavity must be cleaned and flushed regularly to prevent blockage.

    ●Some models in this series are customized products. When selecting, you need to check the shaft diameter, seal chamber size and medium characteristics to ensure that they are fully matched with the equipment.

    Leave Your Message