- Mechanical Seal Auxiliary System
- Reactor Mechanical Seal
- Mechanical Seals for Chemical and Pharmaceutical Industries
- Special Mechanical Seal for Flue Gas Desulfurization
- Special Mechanical Seal for Coal Washing and Smelting
- Mechanical Seals for High-speed Reactors
- Bottom-entry Special Mechanical Seal
THSXF50 Mechanical Seal for Rotary Joints
Structural characteristics
●Material: The main body is made of 304 or 316L stainless steel with polished surface, no sanitary dead corners, and meets the cleanliness requirements of the pharmaceutical and food industries.
●Sealing and connection: Equipped with mechanical seal (to ensure leak-free transportation), the inlet and outlet adopt quick-release clamp interface, which is convenient for rapid disassembly and cleaning, and is suitable for sanitary piping systems.
●Overall design: The structure is compact and the impeller and pump body are precisely matched to ensure fluid delivery efficiency while meeting the strict requirements of GMP (Good Manufacturing Practice) on equipment cleanliness.
Working parameters (typical range)
●Pressure: ≤ 1.6 MPa
●Temperature: -20℃ ~ 180℃
●Surface speed: ≤ 20 m/s
●Shaft diameter: Suitable for φ50 mm rotary joint shafts
●Rotational speed: ≤ 3000 r/min
Applicable media
●Conventional media: Water, oils, organic solvents, etc.
●Corrosive media: Weak acids, weak alkali solutions, and some organic solvents (requires matching fluororubber + silicon carbide friction pair).
●Particle-containing media: Sewage, chemical process liquids (particle content ≤ 20%, requires matching silicon carbide against silicon carbide friction pair).
Application Areas
●Rotary joint support: Shaft sealing for various industrial rotary joints (e.g., steel continuous caster rotary joints, paper machine dryer rotary joints, chemical reactor rotary joints).
●Industry coverage: Steel metallurgy, papermaking, chemical processing, food processing, and other equipment scenarios requiring continuous rotary medium transfer.
Special Instructions
●During installation, strictly ensure the coaxiality between the rotating shaft and the seal (tolerance ≤ 0.05 mm), and the shaft surface roughness must meet Ra ≤ 3.2 μm.
●A flushing/cooling medium circulation system must be provided. The medium must be compatible with the process medium. Regularly check the patency of the interfaces to prevent particle blockage.
●During selection, verify the rotary joint shaft diameter, seal chamber dimensions, and medium characteristics to ensure full compatibility with the equipment. Before long-term shutdown, drain the medium from the seal chamber to avoid corrosion.






