- Mechanical Seal Auxiliary System
- Reactor Mechanical Seal
- Mechanical Seals for Chemical and Pharmaceutical Industries
- Special Mechanical Seal for Flue Gas Desulfurization
- Special Mechanical Seal for Coal Washing and Smelting
- Mechanical Seals for High-speed Reactors
- Bottom-entry Special Mechanical Seal
Plan53A mechanical seal auxiliary system (pressurized double seal circulation system)
Structural characteristics
●Integrated design: It consists of a pressure tank, a circulation pump, pressure/liquid level monitoring instruments (pressure gauge, pressure transmitter, liquid level gauge), valve components and mounting brackets. The overall structure is compact and easy to install and integrate on site.
●Circulation drive: Equipped with a small electric circulation pump, it actively drives the buffer solution to circulate between the sealing chamber and the pressure tank. It is suitable for sealing scenarios with low viscosity and volatile media.
●Pressure control: Through the pressure tank and valve system, the buffer pressure can be stably controlled to be 0.1~0.3MPa higher than the process medium pressure, achieving "zero leakage" sealing.
●Monitoring function: Integrated pressure transmitter, liquid level gauge and other components can monitor the pressure and liquid level status of the buffer solution in real time, and support remote signal transmission and fault warning.
Working parameters
●Pressure: The system design pressure can reach 10MPa, and the buffer pressure control accuracy is ≤±0.05MPa.
●Temperature: Applicable temperature range: -40℃~200℃, optional cooling/heating components can be used to expand the temperature range.
●Flow rate: The circulation pump flow rate range is 0.5~5m³/h (adapted to different shaft diameter seals according to the model).
●Power supply: Suitable for industrial power supply (such as 220V/380V AC), power ≤1.5kW.
Applicable media
●Buffer medium: clean water, ethylene glycol solution, special synthetic oil, etc., must be fully compatible with the process medium.
●Process media: Suitable for volatile, low-viscosity, toxic/flammable/explosive media (such as liquefied petroleum gas, propylene, vinyl chloride, etc.), as well as high-risk fluids containing particles (filtering devices need to be added at the front end).
Application Areas
●Petrochemical industry: centrifugal pumps and compressor double-end mechanical seal auxiliary systems for transporting liquefied hydrocarbons and chemical raw materials.
●Energy industry: Sealing protection for natural gas liquefaction equipment, cryogenic storage tank pumps and other equipment.
●Pharmaceutical/Food: Seals for organic solvent and high-purity media delivery pumps with hygienic requirements (316L stainless steel material is optional).
Special Instructions
●Installation requirements: The circulation pump must be installed below the sealed chamber, using gravity to assist circulation; the pressure tank must be installed vertically, with the liquid level sight glass facing the direction for easy observation.
●Operation specification: When starting, start the circulation pump first, and then start the main pump after the buffer pressure stabilizes; when shutting down, stop the main pump first, and delay the operation of the circulation pump for 5 to 10 minutes to ensure that the sealing chamber is fully cooled.
●Maintenance points: Regularly check the operating status of the circulation pump (current, noise), replace the buffer solution and clean the pressure tank every quarter; if the medium contains particles, clean the front-end filter every month to avoid clogging the circulation pipeline.


